Cel-Fi GO M 3G/4G/5G Signal Booster for Road Vehicles & Marine Vessels

GO M

The Cel-Fi GO M is an evolved smart mobile signal booster that can amplify mobile signal whilst on the road or on board. The Cel-Fi GO M uses Nextivity’s award-winning, network-safe technology to automatically adapt to the moving environment and boost 3G / 4G / 5G for voice and data.

The Cel-Fi GO M in-vehicle solution can be installed in cars, vans, caravans, and motorhomes, trucks, and marine vessels.

OPTIONS


KEY FEATURES

  • Improved mobile signal on 3G / 4G / 5G for voice and data
  • IP65 rated, weather-resistant
  • Available for O2, EE, Three, Vodafone, and all hosted MVNO
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Dynamically adjust gain in compliance with OFCOM regulation

HOW DOES IT WORK?

Cel-Fi mobile signal boosters improve signal between a mobile phone and a mobile network tower, allowing you to have clear voice conversations and a stable data connection when you are travelling. An external donor antenna collects the best mobile signal from outside and transmits it to a mobile signal booster unit. The unit strengthens the signal and rebroadcasts it inside the vehicle or vessel via internal server antennas. For best results, separate the donor and server antenna(s) as much as possible.

The system needs to detect a minimum 3G signal outside of the vehicle to operate.

The Cel-Fi GO M is cost-efficient, easy-to-setup with an installer and can be managed and monitored by using the Cel-Fi WAVE App.

*Images shown are for illustration purpose only, actual product may vary.

Cel-Fi products are licence-exempt and fully comply with Ofcom’s UK Interface requirement 2102 (IR2102) (UK) and ComReg S.I.No.283 of 2018 (Ireland).

Details

The Cel-Fi GO M bundles addresses poor mobile coverage when you’re on the road or onboard.

How does it work?

Cel-Fi mobile signal solutions improve signal between a mobile phone and a mobile network tower, allowing you to have clear voice conversations and a stable data connection. An external antenna collects the best mobile signal from outside and transmits it to a mobile signal booster unit which strengthens the signal and broadcasts it inside the vehicle / marine vessel.

What is included in the bundles?

The Cel-Fi GO M bundles include:

  • Cel-Fi GO M mobile signal booster
  • Car Charger
  • Cel-Fi Mag Mount Donor Antenna OR Cel-Fi Marine Donor Antenna OR Cel-Fi Truck Antenna
  • Cel-Fi Mobile Server Antenna

This Cel-Fi GO M Vehicle bundle includes the Cel-Fi GO M mobile signal booster and two of the best-performing antennas optimised for GO products.

The Cel-Fi GO M booster harnesses Nextivity's award-winning, network-safe technology to automatically adapt to the moving environment and boost 3G / 4G / 5G for voice and data. The Cel-Fi GO M is the first carrier-class IP65 weather resistant mobile coverage solution. The IP65 rating provides a degree of protection against ingress of solid foreign objects (like falling dirt and windblown dust), the ingress of water (rain, sleet, snow, splashing water, and hose directed water) and will be undamaged by the external formation of ice on the enclosure.

The Cel-Fi Mag Mount donor antenna is an outdoor wideband mobile omnidirectional antenna with up to 4dB gain. The weather-resistant IP65 plastic casing is built to securely attach to cars, vans, caravans and motorhomes.

The Cel-Fi Truck donor antenna was developed to offer a high-performance wideband antenna option for cross country truck drivers. The product features a heavy-duty spring base and includes a mirror-mount for easy installation.

The Cel-Fi Marine donor antenna collects the cell tower signal to send the signal to the Cel-Fi GO M signal booster. When the mobile phone transmits, the signal is transferred to a signal booster and transmitted back to the cell tower.

The Cel-Fi mobile server antenna is a mobile patch antenna that dynamically adjusts the gain in compliance with Ofcom’s licence-exempt regulation. The Cel-Fi mobile server antenna has an adhesive mount for ease of installation.

The Cel-Fi GO M bundles are great value for money, easy to deploy by an installer and can be optimised and monitored by the Cel-Fi WAVE Platform.

Key features

  • Boosts 3G / 4G / 5G for voice and data simultaneously
  • IP65 rated, weather-resistant
  • Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
  • Can easily switch between mobile networks via the Cel-Fi WAVE app
  • Dynamically adjust gain in compliance with OFCOM regulation
  • Network safe, carrier approved
  • 6 easy steps to set-up and install
  • Smart Signal Booster with IntelliBoost© Chipset - Unconditionally Network Safe
  • Remote monitoring and management with the Cel-Fi WAVE app

The system needs to detect a minimum signal outside to operate.

Technical Specifications

  • Simultaneously supports multiple channels with bandwidths from 5 to 20 MHz.
  • Total system relay bandwidth of 40 MHz.
  • Supports two (2) bands simultaneously from a single operator.
  • Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells and mobile devices.
  • Automatic Gain Control (AGC) based on fast real-time echo-cancellation.
  • Dynamic gain control ensures maximum gain, best coverage in ever-changing RF environments, without user intervention.

Cel-Fi Commitment

Artificial intelligence and Nextivity's award-winning Intelliboost® signal processing delivers the industry's best voice and data wireless performance. It is guaranteed to be unconditionally network safe and does not interfere with other wireless devices.

Cel-Fi products are licence-exempt and fully comply with Ofcom’s UK Interface requirement 2102 (IR2102) (UK) and ComReg S.I.No.283 of 2018 (Ireland).

Network Safe

Self-organising edge intelligence ensures that Cel-Fi GO M do not interfere with other indoor wireless products such as Wi-Fi routers, Small Cells and DAS.

High speed Automatic Gain Control ensures that Cel-Fi GO M are unconditionally network safe and enables more simultaneous calls and higher data speeds.

Activate, Optimise and Manage Cel-Fi products with the Cel-Fi Wave App

Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring and updating Cel-Fi products.

If your circumstances do change and you decide to switch your Mobile Network Operator, the app's functionality enables you to futureproof your investment by allowing you to easily swap between mobile networks as and when required.

It provides a glanceable view to the state of your Cel-Fi environment and includes:

  • A dashboard overview of all your systems
  • Real-time data and performance metrics
  • Easy activation and registration
  • Operator changeover if you switch your network
  • Software update management
  • Users and group management

The Cel-Fi WAVE App is available for iOS, Android, PC and Mac devices.

*This unit supports multiple networks however only one network can be used at a time. The WAVE App can be used to switch between mobile networks.

Compatibility

O2, EE, Three, Vodafone & all Mobile Virtual Network Operators.

Select Your Bundle