BUNDLE: Cel-Fi GO X for EE with Indoor & Panel Antennas
This all-in-one Bundle for the Cel-Fi GO X Smart Signal Booster, gives you everything you need to setup the GO X with a Panel Antenna, which is in most cases the best option. This bundle includes:
- 1 x Nextivity Cel-Fi GO X Signal Booster pre-configured for Vodafone (this network can be swapped at any time using the WAVE App)
- 1 x Nextivity Wideband Panel Antenna. This is the Donor Antenna that should be pointed towards the closest Cell Site / Network Tower.
- 1 x Wideband Indoor Omni Antenna. This is the Server Antenna that will transmit the boosted signal. It should be placed were the signal is most needed.
- 2 x Nextivity 10m Low Loss Cables to connect the Antennas to the GO X unit. If you require additional cables, see: Nextivity 10m Low Loss Cable
- 1x SMA Male to N-Type Male adapter
- [OPTIONAL - NOT INCLUDED]Cel-Fi Pole Mount. This is an outdoor mount that can be purchased separately if needed, to secure a cellular donor antenna (like the Wideband Directional Antenna) on a pole.
You can easily switch between boosting Vodafone, O2, EE or Three signal using the WAVE App.
Cel-Fi Smart Signal Boosters are licence exempt under UK law and fully meet the requirements of Ofcom SI 2018/399. Cel-Fi GO X is CE and FCC approved.
Please refer to the Cel-Fi GO X product page for more details
*Images shown are for illustration purpose only, actual product may vary.
BUNDLE ITEM 1: Cel-Fi GO X 3G / 4G Signal Booster - for EE
This Cel-Fi Smart Signal Booster is licence exempt under UK law and fully meets the requirements of Ofcom SI 2018/399.
The Cel-Fi GO X Smart Signal Booster is a premium mobile phone signal booster that strengthens your 3G and 4G signal coverage. It is the first carrier-class indoor/outdoor mobile coverage solution to feature industry leading 100dB signal gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO X leverages the award winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance.
Cel-Fi GO X is IP65 rated weather resistant and does not interfere with other wireless devices. This multi-carrier solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes. Cel-Fi GO X is cost efficient and easy-to-setup with an installer and can be easily optimised and monitored by using the Cel-Fi WAVE App.
Cel-Fi GO X can be set up in five easy steps. First install the Donor Antenna (Wideband Panel Antenna), then install the Server Antenna (Wideband Indoor Omni Antenna). Mount the GO X unit near a power outlet and the connect the Antennas to the unit. Finally plug in the Cel-Fi GO X and monitor/optimise using the WAVE App.
Read more on the GO X product page
BUNDLE ITEM 2: Wideband Panel Antenna
The Cel-Fi Wideband Panel Antenna is an indoor / outdoor mobile wideband directional antenna with 6dB gain in the low bands and 10 dB gain in the high bands. The weather resistant housing is built with UV stabilized ABS plastic. Optimised for Cel-Fi products, the Cel-Fi Wideband Panel Antenna can be used with the Cel-Fi WAVE Antenna positioning app. The unit includes standard brackets for wall mounting, or can be used with any Cel-Fi Mount.
- Boosts mobile signal up to 9dBi
- 700-2700 MHz Frequency
- Vertical polarisation
The Wideband Panel Antenna is one of the Antenna options for Cel-Fi GO X, but it can also be used with Cel-Fi Solo if deemed necessary.
BUNDLE ITEM 3: Wideband Indoor Omni Antenna
The Indoor Omni Antenna receives and transmits signal in a 360° pattern and are compatible with the 806-960 / 1710-2700 MHz frequency ranges that include 3G and 4G signals. Gold/Nickel Plated contacts - High Quality Gold/Nickel Plated N-Type Female Connector with 20cm of RG58 coaxial cable. Ceiling Mountable - Requires an 18mm mounting hole, fits ceiling tiles with a thickness of 1 - 30mm.
• 3G/4G/LTE wideband cellular antenna
• N-Type Female connector
BUNDLE ITEM 4: SMA Male to N-Type Male Adaptor
Nickel Plated / Gold Plated - With either Gold or Nickel plating to stop connector corrosion ensuring a permanent good connection.
BUNDLE ITEM 5: 2x (Two) Nextivity 10m Low Loss Cables
Two official Nextivity 10m Low Loss Cables, with SMA-Female / SMA-Male Connectors. Ideal for connecting the Nextivity Cel-Fi Wideband Directional and Indoor Omni Antennas to the Cel-Fi Go X Mobile Signal Booster.